Cross-section of the management system standards in the folder
The sources are the PDFs in the working folder. These texts compare them. They do not pull the requirements together into one common set of…
Read articleAcross the management system standards
For: V, IA
Source: ISO 9001:2026, 0.3.2 and 0.4. ISO 14001:2026, 0.4 and 0.5. ISO 45001:2018, 0.4 and 0.5, German version DIN EN ISO 45001:2023-12. ISO/IEC 27001:2022, foreword and 0.2. ISO/IEC 42001:2023, section on compatibility with other management system standards. Figure captions, without the figures.
The five requirement standards arrange the requirements for the organization's management system into clauses 4 to 10: context of the organization, leadership, planning, support, operation, performance evaluation, improvement. The introductions describe this as a common structure. The wording under these headings is not the same in the places that Q3 to Q8 compare. What is audited is the sentence of the respective edition.
ISO 9001:2026. 0.4 begins with the harmonized approach as published in the ISO/IEC Directives for the development of management system standards. The intention is to support alignment and to facilitate the integration of the requirements and recommendations of one or more management system standards into the organization's management system. The same place says that the document provides a basis for applying the process approach together with the PDCA cycle, with risk-based thinking and with opportunity-based thinking, in order to align or integrate the quality management system with the requirements of other management system standards. 0.4 further says that the document contains no requirements that are specific to other management systems, such as environment, occupational health and safety, or asset management. Sector standards on this basis are named there and are not retold here. ISO 9000, ISO 9002 and ISO 9004 are named in 0.4 and are not available.
0.3.2 describes the PDCA cycle as follows. Plan: establish the objectives of the system and its processes, and the resources needed to deliver results in line with the requirements of customers and of other relevant interested parties and with the policy, and determine and address risks and opportunities. Do: implement what was planned. Check: monitor and, where applicable, measure processes and the resulting products and services against the policy, objectives, requirements and planned activities, and report the results. Act: take actions to improve the performance of the quality management system. The cycle can be applied to all processes and to the quality management system as a whole. "Can". Figure 2 shows how clauses 4 to 10 can be grouped in relation to the PDCA cycle. The note says that the numbers in brackets refer to the clauses. The figure is not redrawn. The assignment of a clause to a step is not reconstructed here from the figure. The rest of the process approach is in 9001-04.
ISO 14001:2026. 0.4 describes PDCA as an iterative process. It can be applied to the environmental management system and to each of its elements. Plan: establish environmental objectives and the processes needed to deliver results in line with the environmental policy. Do: implement the processes as planned. Check: monitor and measure processes against the environmental policy, including its commitments, the environmental objectives and the operating criteria, and report the results. Act: take actions for continual improvement. Figure 1 carries the heading on the relationship between PDCA and the framework of this document. It is not redrawn.
0.5 says that the document conforms to the ISO requirements for management system standards. That includes a harmonized structure, identical core text and common terms with core definitions. It contains no requirements that are specific to other management systems, such as quality, occupational health and safety, energy or financial management. It enables the organization, with a common approach and with risk-based thinking, to integrate its environmental management system with the requirements of other management systems. Annex A remains informative; see 14001-19.
ISO 45001:2018. 0.4 bases the approach on PDCA. The cycle is iterative. It can be applied to a management system and to each of its elements. Plan: determine and assess OH&S risks, OH&S opportunities and other risks and other opportunities, and establish OH&S objectives and the processes needed to deliver results in line with the OH&S policy. Do: implement the processes as planned. Check: monitor and measure activities and processes with regard to the OH&S policy and the OH&S objectives, and report the results. Act: take actions for the continual improvement of OH&S performance in order to achieve the intended results. Figure 1 carries the same kind of heading as in ISO 14001. The note says that the numbers in brackets are clause numbers. The figure is not redrawn. The German rendering is in 45001-01.
0.5 speaks of "high level structure, identical core text and common terms with core definitions". The German text says Grundstruktur, identischer Haupttext und gemeinsame Benennungen mit Basisdefinitionen. The document contains no requirements that are specific to quality, social responsibility, environment, security or financial management. Elements can be aligned or integrated with other management systems. "Can". English clause 0.5 does not use the name Annex SL. The national foreword of the DIN edition names it. That remains DIN text, as in Q1.
ISO/IEC 27001:2022. The foreword names as a change that the text has been aligned with the harmonized structure for management system standards and with ISO/IEC 27002:2022. ISO/IEC 27002:2022 is not available. 0.2 says that the document uses the high-level structure, identical subclause headings, identical text, common terms and core definitions from Annex SL of the ISO/IEC Directives, Part 1. This PDF contains no PDCA clause. A PDCA cycle is not read into this edition from the other standards. According to 0.1, the order of the requirements reflects neither importance nor the sequence of implementation.
ISO/IEC 42001:2023. The section on compatibility says that the document applies the harmonized structure: the same clause numbers, the same headings, the same text and common terms with core definitions. The introduction says that the order of the requirements reflects neither their importance nor the sequence of implementation. This PDF contains no PDCA clause. Clauses 4 to 10 are not sorted here into a PDCA cycle that the document does not describe.
ISO/IEC 17021-1:2015, ISO/IEC 27006:2015, ISO/IEC 27005:2018. ISO/IEC 17021-1 arranges principles in clause 4 and requirements in clauses 5 to 10. This is the standard of the body that certifies, explained in 17021-01. ISO/IEC 27006:2015 follows this arrangement and marks ISMS additions with "IS". ISO/IEC 27005:2018 is guidance in clauses 1 to 12. None of the three documents is a management system standard of the certified organization with clauses 4 to 10.
Not in this text: a self-drawn figure that places clauses on PDCA steps, and a common PDCA sentence for ISO/IEC 27001:2022 or ISO/IEC 42001:2023. The Directives to which 0.4 and 0.5 refer are not available.