Explanations of ISO 9001:2026
The source is ISO 9001:2026(en), sixth edition, English text. It replaces ISO 9001:2015 and incorporates the amendment ISO 9001:2015/Amd…
Read articleISO 9001:2026
For: V, IA
Source: ISO 9001:2026(en), sixth edition, English. 8.3, A.8.3, A.3, 4.3
When 8.3 applies. 8.3.1 is a requirement. The organization shall establish, implement and maintain a design and development process that is appropriate to ensure the subsequent provision of products and services. According to A.2, "appropriate" means suitable for the context and includes a judgment. It does not mean that the clause can be dropped as soon as the organization considers it impractical.
Whether a requirement is not applicable is decided by 4.3. The scope shall contain the justification. Conformity can be claimed only if the requirements determined as not applicable do not impair the ability or the responsibility to ensure the conformity of the products and services and to enhance customer satisfaction. A.3 is the reading key for this and is set out in 9001-05. A.3 does not add a second rule of exemption.
8.3.1. The note says that the design and development process can comprise cycles of review, verification, validation and feedback and can thus allow an iterative approach across the design and development stages. That is a possibility.
8.3.2 Planning. When determining the stages and the controls, the organization shall consider: the nature, duration and complexity of the design and development activities; the process stages required, including applicable design and development reviews; the verification and validation activities required; responsibilities and authorities; internal and external resources; the need to control interfaces between the persons involved; the need to involve customers and other relevant interested parties; the requirements for subsequent provision; the level of control expected by customers and other relevant interested parties; the documented information needed as evidence that design and development requirements have been met. "Consider" obliges these points to be thought through. The reading key is in 9001-25.
8.3.3 Inputs. The organization shall determine the requirements essential for the particular types of products and services to be designed and developed. It shall consider: functional and performance requirements; information from previous similar design and development; statutory and regulatory requirements; standards or codes of practice to which it has committed itself to implement; the potential consequences of failure due to the nature of the products and services. Inputs shall be complete, unambiguous and adequate for design and development. Conflicting inputs shall be resolved. The English wording is "resolved". The note says that inputs are not always completely defined or known at the start. They can evolve as design and development progresses, through repeated cycles. The note does not lift the obligation that inputs are complete, unambiguous and adequate for the purpose of design and development.
8.3.4 Controls. The organization shall apply controls to the design and development process in order to ensure that the results to be achieved are defined; that reviews are conducted in order to evaluate the ability of the design and development results to fulfil the requirements; that verification is conducted in order to ensure that the design and development results fulfil the input requirements; that validation is conducted in order to ensure that the resulting products and services fulfil the requirements for the specified application or the intended use; that any necessary actions are taken to address problems determined during reviews or during verification and validation; and that documented information is available as evidence of these activities.
The note says that review, verification and validation have different purposes. They can be conducted separately or in any combination, as suits the products and services. The standard does not prescribe three separate meetings. A.8.3 explains the same three purposes as guidance: the ability of the design and development to fulfil requirements; conformity of the results with the input requirements; suitability of the products and services for the intended use or the intended application.
8.3.5 Outputs. The organization shall ensure that design and development outputs fulfil the input requirements; are adequate for the subsequent processes of provision; include or refer to monitoring and measurement requirements, as appropriate, and acceptance criteria; and define the characteristics of the products and services and the information about them that are essential for the intended purpose, including their safe and proper provision.
8.3.6 Changes. The organization shall identify, review and control changes made during or after design and development, to the extent necessary to ensure that there is no adverse effect on conformity to requirements.
A.8.3 describes design and development as the set of activities that transforms initial requirements into specified characteristics. These characteristics can be physical, functional or otherwise. The approach can differ depending on whether the results are services, physical products or both. A note refers to ISO 10007 for changes. This edition is not available.
Documented information: Evidence of the design and development inputs. Evidence of the activities under 8.3.4, that is of the reviews, of the verification, of the validation and of the actions on problems determined. Evidence of the design and development outputs. Evidence of the changes, of the results of the reviews, of the authorization of the changes and of the actions to prevent adverse effects.
Not in this text: a particular design and development model, a sector rule on design and development release, and the content of ISO 10007. Whether 8.3 is not applicable in a concrete scope is not answered by this text. The organization determines that under 4.3.