logo
language iconarrow
menu icon

ISO 45001

45001-10 Hierarchy of controls

3 min read · V, IA, EA

All articles

For: V, IA, EA
Source: DIN EN ISO 45001:2023-12, German, text version ISO 45001:2018. 8.1.2, reference from 5.2 d, 6.1.4 and 10.2 d. Annex A.8.1.2 as guidance. English for cross-checking.

8.1.2 requires processes for the elimination of hazards and the reduction of OH&S risks. The processes shall be established, implemented and maintained by applying the following hierarchy of controls:

a) eliminating the hazard;

b) substitution by less hazardous work processes, operations, materials or equipment;

c) use of engineering controls and reorganization of the work;

d) use of administrative controls, including training;

e) use of suitable personal protective equipment.

This is a requirement. The order is in the wording of 8.1.2. When planning the actions, the organization shall take this hierarchy into account (6.1.4). The OH&S policy shall include a commitment to the elimination of hazards and the reduction of OH&S risks, with a reference to 8.1.2 (5.2 d). Corrective actions and other actions following an incident or a nonconformity shall be determined and carried out in accordance with this hierarchy and with the management of change (10.2 d).

The note to 8.1.2 says that in many countries legal requirements and other requirements also include the duty to provide personal protective equipment free of charge. That is a note, not a requirement of this standard that the equipment be free of charge.

National footnote N1 of the DIN edition says that the approach is anchored in § 4 of the Occupational Health and Safety Act and corresponds very largely to the STOP principle. That is a footnote of the German edition, not a requirement of ISO 45001:2018 and not a comment on that statute.

A.8.1.2, guidance, says that the hierarchy is intended to represent a systematic approach. The English text says “is intended to provide”. The effectiveness of the controls is said to decrease further down. Each control is regarded as less effective than the one before it. Usually several controls would be combined in order to reduce OH&S risks to a level as low as reasonably practicable. The English Annex says “as low as reasonably practicable”. That remains guidance. Clause 1 does not lay down specific OH&S performance criteria. The examples at each level, from the elimination of a hazardous substance to instruction in the use of protective equipment, are not copied out as a checklist.

ISO 14001:2026 says, in a note to 8.1, that controls could include a hierarchy. The word there is a possibility. The hierarchy as a sequence that is to be applied stands in this document in 8.1.2.

Not in this text: an interpretation of § 4 of the Occupational Health and Safety Act, a prescribed cost for protective equipment, and the example controls from A.8.1.2 as a second required list alongside the five levels.