logo
language iconarrow
menu icon

ISO 45001

45001-01 Objective, success factors, PDCA, content

6 min read · V

All articles

For: V
Source: DIN EN ISO 45001:2023-12, German, text version ISO 45001:2018. Introduction 0.1 to 0.5, clause 1, clause 2. English for cross-checking.

0.1 says that an organization is responsible for the occupational health and safety of workers and of other persons who can be affected by its activities. This responsibility includes the promotion and protection of their physical and mental health. The next sentence uses “soll”. The English text says “is intended to”: the introduction of an OH&S management system is intended to enable the organization to provide safe and healthy workplaces, to prevent work-related injury and ill health, and to continually improve OH&S performance. That is a statement of purpose in the introduction, not a requirement marked with “muss”.

0.2 names the purpose: a framework for addressing OH&S risks and OH&S opportunities. The aim and the intended outcomes are the prevention of work-related injury and ill health of workers and the provision of safe and healthy workplaces. It is therefore of critical importance to avoid hazards and to minimize OH&S risks by taking effective preventive and protective measures. If the organization carries these measures out through its OH&S management system, they improve OH&S performance. The system can be more effective and more efficient when action is taken early in order to take advantage of opportunities to improve OH&S performance. A system that conforms to this document enables the organization to address its OH&S risks and to improve its OH&S performance. It can support the organization in fulfilling legal requirements and other requirements. “Kann” is a possibility.

0.3 makes implementation a strategic and operational decision. Success depends on leadership, commitment and participation from all levels and functions. Effectiveness and the achievement of the intended outcomes can depend on key factors. The list is introduced with “können”: leadership, commitment, responsibilities and accountability of top management; a culture, developed, led and promoted by top management, that supports the intended outcomes; communication; consultation and participation of workers and, where they exist, their representatives; resources; OH&S policies that are compatible with the strategic objectives and the direction; effective processes for identifying hazards, controlling OH&S risks and taking advantage of OH&S opportunities; continual performance evaluation and monitoring in order to improve OH&S performance; integration into the business processes; OH&S objectives that are consistent with the policy and that take account of the hazards, the OH&S risks and the OH&S opportunities; compliance with legal requirements and other requirements. That is not a second list of requirements alongside clauses 4 to 10.

The same clause states the sentence that draws the limit of the standard:

However, the introduction of this document alone does not ensure that work-related injury and ill health of workers are prevented, that safe and healthy workplaces are provided, and that OH&S performance is improved.

Evidence of successful implementation can assure workers and other interested parties that an effective system is in place. The level of detail, the complexity, the extent of documented information and the resources depend on the context, on the scope and on the nature of the activities together with the associated OH&S risks. As examples of the context, 0.3 names the number of workers, size, geographical location, culture, legal requirements and other requirements.

0.4 bases the approach on Plan, Do, Check, Act. The cycle is iterative and can be applied to the system and to each of its elements.

  • Plan: determine and assess OH&S risks, OH&S opportunities and other risks and opportunities, and establish OH&S objectives and processes in order to achieve results in accordance with the OH&S policy.
  • Do: implement the processes as planned.
  • Check: monitor and measure activities and processes with regard to the OH&S policy and the OH&S objectives, and report the results.
  • Act: take action for the continual improvement of OH&S performance in order to achieve the intended outcomes.

Figure 1 places the framework in this PDCA concept. The note says that the numbers in brackets are clause numbers. The figure is not reproduced here.

0.5 says that the document conforms to ISO’s requirements for management system standards, including a high-level structure, identical core text and common terms with core definitions. It contains no requirements specific to quality, social responsibility, the environment, security or finance. Elements can be aligned with other management systems or integrated into them.

An organization can demonstrate conformity in one of four ways: self-assessment and self-declaration; confirmation by parties with an interest in the organization, such as customers; confirmation of the self-declaration by a party external to the organization; certification or registration by an external organization. Those are possibilities.

Clauses 1 to 3 set out the scope, the normative references and the terms. Clauses 4 to 10 contain the requirements used for conformity assessment. Annex A gives informative explanations. The verbal forms are in 0.5, as quoted in the introduction to this file.

Clause 1 sets requirements for an OH&S management system and gives guidance so that organizations provide safe and healthy workplaces by preventing work-related injury and ill health and by proactively improving their OH&S performance. It applies to any organization that wants to establish, implement and maintain a system in order to improve occupational health and safety, eliminate hazards, minimize OH&S risks including system deficiencies, take advantage of OH&S opportunities, and address nonconformities of the system that are associated with its activities. Consistent with the OH&S policy, the intended outcomes include:

a) continual improvement of OH&S performance;

b) fulfilment of legal requirements and other requirements;

c) achievement of OH&S objectives.

The document applies regardless of size, type and activities. It applies to the OH&S risks within the organization’s sphere of influence, taking into account the context and the needs and expectations of workers and of other interested parties. It neither lays down specific criteria for OH&S performance nor prescribes the design of the system. It enables an organization to include further aspects such as work-related well-being. That is an enabling provision, not an obligation to have a well-being programme of its own. It does not address topics such as product safety, property damage or environmental impacts beyond the risks to workers and other relevant interested parties.

The document can be used in whole or in part for systematic improvement. Claiming conformity is not permissible unless all requirements are incorporated into the OH&S management system and fulfilled without exception. The English wording is “without exclusion”.

Clause 2: no normative references.

3.11, Note 2 to entry, says that “Sicherheit und Gesundheit bei der Arbeit”, “Arbeitsschutz” and “Arbeitssicherheit und Gesundheitsschutz” have the same meaning in this document. The national foreword says at the same time that the standard does not regulate operational occupational health and safety. Both stand in the PDF, on different levels: the term, and the demarcation in the national foreword.

Not in this text: an article on climate. This PDF does not contain the later climate-change amendment. No comment on the Occupational Health and Safety Act, accident-prevention regulations or collective agreements. The national foreword refers to these levels and does not make them the content of the ISO requirements. ILO-OSH 2001 and OHSAS 18001 are not retold. The certification process is set out in ISO/IEC 17021-1, not here.